Basic Info.
Certification
ISO9001, UL, RoHS, CE
Product Description
Parts and demands of sterilizer
It is consists of three parts:Sterilizer box,Auxiliary equipment(vacuum system,Heating water tank humidification system,Add EO system,Gas circulation system,air-operated system and Tail gas processor)control system.
1. Sterilizer box
1.1 The sterilizer box is composed of stainless steel inner tank and atomizer water tank.
The material of the box shall meet the requirements of vacuum degree and pressure.
The sterilizer adopts water circulation heating or electric heating;
1.2 Material of inner tank: stainless steel SUS304, actual thickness ≥5mm;
The supplier shall provide the quality list and inspection report for the material;
1.3 Water jacket: using 6mm stainless steel on both sides and top surface;
1.4 Temperature perception outside the sterilizer box:
there is no obvious temperature perception outside during the sterilization cycle;
1.5 Thermal insulation: the thickness of rock wool is >5cm. During normal operation,
it should have good thermal insulation performance and
no obvious temperature sensation in the appearance during sterilization process;
1.6 Shell plate: Stainless steel SUS304 drawing plate =1.2mm;
1.7 Sterilizer door:Adopting single gate structure,Pneumatic single door seal
(The chute automatically opens and closes the door smoothly)
In case of failure in use, please guarantee it is locked and sealed all the time.
Sealing method: silicone rubber outer air sealing;
1.8 Monitoring instrument: pressure, humidity, temperature monitoring
devices are automatically real-time monitored, accuracy and error is ±1%;
1.9 Motor: 380V 50Hz.
2. Vacuum system
2.1 The sterilizing chamber is fore-vacuumed and sterilizer discharged by vacuum pump;
2.2 The vacuum can be pulsated or graded;
2.3 The vacuum tube adopts SUS304 material;
2.4 Pressure range: -70kPa to + 60kPa, keeping pressure 60min, leakage rate <0.01kpa/min;
2.5 Vacuum speed: atmospheric pressure to -15kPa ≤6min, -50kPa ≤30min, -70kPa ≤40min .
3. Heating and thermal circulation system
3.1 Water cycle heating or electric heating is adopted for heating.
The heating system is equipped with an electric heating tank,hot water circulation pump,
the corresponding pipeline valve. The water tank is made of SUS304 stainless steel, the actual thickness is ≥5mm,
and the temperature sensor inside the cabinet is > 8m. It has the advantages of fast heating,
simple design and structure, and more convenient use;
3.2 Automatic real-time temperature monitoring instrument, it will give an alarm in case of exceeding the set temperature,
the temperature control range inside the cabinet is <65ºC, accuracy ±3ºC.
4. Humidification system
4.1 Equipped with automatic steam generator and corresponding pipeline
(Atomized water cannot be injected directly The partial pressure of humidifying steam shall not exceed 50kPa)
No less than 2 humidity sensors;
4.2 Separate steam injection line and filter(degerming level);
4.3 The steam pipe is made of SUS304;
4.4 Automatic real-time monitoring, it will alarm while exceeding the set humidity,
humidity error inside the cabinet is ±5%RH.
5. Residue removal system
5.1 After the sterilizer is discharged, the air is filtered, and enter the sterilizing chamber.
(The filtration rate of > 0.3 m particles is at least 99.5% and convenient for disassembly);
5.2 According to the sterilization process, filtered air can be imported to the atmospheric pressure,
and then the sterilization chamber can be vacuumed, 0-99 times as determined;
5.3 According to the sterilization process, the ethylene oxide gas body
is cleaned by continuous flow of filtered air through the sterilization chamber;
5.4 After the complete sterilization, the excess gas in the cabinet shall be extracted through
the water ring vacuum pump and at the same time be fully mixed and dissolved with water;
5.5 Dissolved waste water is stored in the waste liquid tank and discharged into the sewage pipe.
6. Pneumatic system:
6.1 During the sterilization process, Opening and closing of all control valves,
seal of doors and removing seal of the door is achieved by using stainless steel SUS304 pneumatic valve,
SUS304 air pipe , SUS304 air cylinder and other pneumatic components(security);
6.2 The Pipe fittings and components such as valves, interfaces and filters shall meet the requirements of YY0503-2016.
6.3 According to the sterilization process, the ethylene oxide gas body
is cleaned by continuous flow of filtered air through the sterilization chamber;
6.4 After the complete sterilization, the excess EO gas in the cabinet shall be extracted through
the water ring vacuum pump and at the same time be fully mixed and dissolved with water;
6.5 Dissolved waste water is stored in the waste liquid tank and discharged into the sewage pipe.
7. Pneumatic system:
7.1 During the sterilization process, Opening and closing of all control valves,
seal of doors and removing seal of the door is achieved by using stainless steel SUS304 pneumatic valve,
SUS304 air pipe , SUS304 air cylinder and other pneumatic components(security);
7.2 The Pipe fittings and components such as valves, interfaces and filters shall meet the requirements of YY0503-2016.
The sterilization standard of 99.9% can be completed in 8-5 hours
The 10-hour resolution completes sterilization of disposable medical masks
(Analytical bag packing)
APPLICATION SCOPE OF LARGE STERILIZER
Manufactured by domestic outstanding equipment and expert team.
Endoscope Category:
Thoracoscope ,laparoscopy, laryngoscopy, bronchoscopy, esophagoscopy, rectoendoscopy, cystoscope, urethroscope, esophagofiberscope, duodenal fiber endoscope, large intestine fiber endoscope, vascular fiber endoscope, etc.
Rubber goods:
Gloves, finger covers, injection needles, syringes, blood collection devices, transfusion devices, blood transfusion devices, urine collection bags, test tubes, ventricular catheters, venous catheters, vascular catheters, various kinds of drainage tubes and hoses.
Instruments and equipment:
surgical instruments, medical electric drill, electric saw, bone saw, bone plate, automatic sutures, various suture lines, suture needles, electric knife head, argon knife head, artificial esophagus, artificial bone, artificial heart membrane flap, artificial blood vessel, artificial lung circuit, cardiac pacemaker, pacemaker electrode, drainage device, etc.
Anesthesia apparatus:
endotracheal tube, nasal catheter, tracheotomy cannula, ventilator threaded tube, venous pressure measuring tube, extracorporeal circulation perfusion tube, oxygen mask, threaded tube, anesthesia bag, closed circulation loop, artificial respiration parts, etc.
Cotton fiber products and other:
clothing and clothing, gauze, bandages, cotton ball, skimmed ball, operating clothes, operating cap.
Product specification
Product model | Power supply | Disinfection mode | The tank capacity | The tank size | Carton size |
Y2.0 | AC380V | low temperature | 6KVA | 1500*1000*1400 | 2200*1300*1900 |
Y3.0 | AC380V | low temperature | 7KVA | 1700*1200*1500 | 2400*1500*2000 |
Y5.0 | AC380V | low temperature | 10KVA | 2800*1200*1500 | 3600*1500*2000 |
Y6.0 | AC380V | low temperature | 12KVA | 3000*1200*1700 | 3800*1500*2200 |
Y10 | AC380V | low temperature | 20KVA | 4000*1500*1800 | 5000*1900*2300 |
Y15 | AC380V | low temperature | 28KVA | 5800*1500*1800 | 6800*1900*2400 |
Y20 | AC380V | low temperature | 35KVA | 6000*1750*1950 | 7000*2200*2550 |
Address:
Xinbao Creative Park, No. 53, Jinshi Dadao West, Shiling Town, Huadu District, Guangzhou City of China.
Business Type:
Manufacturer/Factory
Business Range:
Health & Medicine, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 13485
Company Introduction:
Guangzhou Liejian Technology Co., Ltd., one of five professional manufacturers in China, is located in the beautiful and rich Pearl River Delta with convenient and developed transportation, a national high and new tech. Of enterprise integrated with research, development, production and sales of medical equipment (apparatus, instruments, parts, and accessories), the factory was founded in 2003, professionally produces medical sterilizer, developed HTY series of ethylene oxide sterilization cabinet, low temperature plasma sterilization cabinet, pulsation vacuum sterilizer, dry heat sterilization machine, air disinfection machine, using the microcomputer control etc., which are used for disinfection and sterilization in various hospitals, clinics and factories that produces epidemic prevention supplies such as medical mask, gloves and protective suits etc., owning the international advanced production equipment and testing instruments, and well-equipped technology, adopting microcomputer control, passed the EU CE certification, ISO9001, IS013485 international quality management, which guarantees the good quality and continuous development of medical industry and progress, with advanced design, reasonable structure, simple and convenient operation.
Our medical products has been exporting to many countries and regions in the world, achieving ideal sterilization effect, which has no pollution to the environment and no harm to the human body.
Improved management, Guided by brand strategy, based on product quality, guaranteed by quality and service, the company has built a set of after-sales service system with its own characteristics.